Flooding caused by failed water heaters, washing machines, frozen leaking pipes and leaking plumbing can be a disaster.
Small leaks can create a flooded basement and home if they go undetected.
HERE IS YOUR SOLUTION!
Introducing the ValveSentry™ - the first and only automatic water shut off device that you install yourself - no plumbing required!
The ValveSentry™ device's water sensor can be placed anywhere in your home to detect unwanted water and promptly turns off water at its source.
The ValveSentry™ device fits over almost any ball or gate valve and shuts off your water main when a leak is detected.
Installation of the ValveSentry™ device is simple and doesn't require cutting into plumbing -- anyone can do it with ordinary hand tools.
If you can turn off your water main valve by hand, you can easily install a ValveSentry™ device over it for automatic shut off.
Place a ValveSentry™ water sensor near water heaters, washing machines, sinks, toilets, and plumbing. If a leak occurs, the sensor sends a signal to the controller, which shuts off the water at its source.
Installation is simple. . . Operation is automatic.
Leaks do not give you any warning signs!
Hot water heaters, washing machine hoses, toilet and sink valves and hoses - these all can fail suddenly and leak continuously until you come home and discover a flooded house and $1000's of damage.
Don't let a leak cause a flooded home!
Continuously monitor your plumbing and shut off your water at the earliest sign of a leak.
For peace of mind when away at work or on vacation.
Protect your valuable property and treasured memories.
ValveSentry™ Automatic Water Shut Off Valve Features
Easy To Install in 15-30 minutes!
No plumbing required!
Every home needs one!
Add up to 8 water sensors! The kit includes 1 water sensor, add more as desired.
Powerful electrical motor with battery back-up in case of power failure!
Suggested Water Sensor Locations
Next to hot water heater
Watch it work! Turns off your valve when sensor is actuated.
View the ValveSentry™ Device Installation Video
Frequently Asked Questions
Q: Do I need to hire a plumber to install the ValveSentry™ device?
A: No. There is no plumbing needed to install the ValveSentry™ device. The ValveSentry™ device simply attaches to your valve. Anyone can quickly install the ValveSentry™ device using common tools in 15-30 minutes.
Q: Do I need a permit or inspection from my town or city authorities when installing the ValveSentry™ device?
A: No, this is not needed. Because there is no plumbing or electrical work performed, no permit or inspection is required.
Q: How does the ValveSentry™ device work?
A: The ValveSentry™ device is connected to your water main valve. It fits any size (up to 3" diameter) and any type (ball or gate) valve. It uses a small but powerful electric motor to turn off the valve in case of a water leak is detected.
Q: How is the ValveSentry™ device powered? What happens if there is a power failure?
A: The ValveSentry™ device is powered from a normal electrical outlet. Also, 7 AAA batteries may be added into the controller. The batteries will operate the ValveSentry™ device if there is a power failure.
Q: How many water sensors can I connect to a single ValveSentry™ device?
A: The ValveSentry™ device can be connected to up to 8 water sensors. Connect the ValveSentry™ device's electric motor to the home's main water valve and place water sensors next to the water heater, washing machine, dishwasher, etc. If any of thes appliances leak, the sensor will send a signal to the main unit shutting off the main water valve, preventing a flood.
Q: Is the the ValveSentry™ device patented?
A: Yes. Multiple patents have been awarded to the product. It is the only do-it-yourself automatic water shut off valve available.
Q: Where can I purchase the ValveSentry™ device?
A: Battic Door is the Master Distributor of the ValveSentry™ device.
Q: What is included with the ValveSentry™ device kit?
A: The ValveSentry™ kit includes the electric motor and assorted hardware to fit any ball valve or gate valve. Also included is the controller, an electrical power cord to power the controller, and 1 water sensor. Additional water sensors may be purchased seperately.
Q: Where is the ValveSentry™ device manufactured?
A: The ValveSentry™ kit is manufactured in USA.
Q: How do I know what type of valve I have? What does a ball valve and a gate valve look like?
A: See pictures below. These are the 2 most common water valve styles. The ValveSentry™ device includes all brackets needed to fit either style valve.
Kit includes controller, acuator and sensor, power cord, battery backup, all wires.