Professional Grade Spray Foam Insulation Kits


Professional Grade Spray Foam Insulation Kits

Two-Component Polyurethane Foam Kits
Portable, disposable and self-contained with color-coded, pre-connected hoses.

These kits are available in sizes from 15-600 board feet and provide a quick consistent flow of foam that dries in under a minute. Foam expands 30X.

Standard and Fire Retardant (FR) Formulas. Contains no CFC's or urea formaldehyde. Qualifies for 10% tax credit (up to $500) by adding insulation to your home!

Closed cell foam

R-value = 7.12 / in.

Density = 1.75 ± .1 pcf

3 Size Kits Include All Hoses, Guns, and Instructions. Easy To Install.

Standard Formula Foam Kit 15 covers 15 square feet at 1 inch thick. Kit Includes 2-Component Polyurethane Foam, Applicator Gun, Hoses, Spray Nozzles, Instructions.

Standard or Fire Retardant Formula Foam Kit 200 covers 200 square feet at 1 inch thick. Kit Includes 2-Component Polyurethane Foam, Applicator Gun, Hoses, Wrench, Latex Gloves, O-rings, Extra Spray Nozzles, Lubricant, and Instructions. Weight is 40 lbs. Shipping costs include Hazmat Fees.

Standard or Fire Retardant Formula Foam Kit 600 covers 600 square feet at 1 inch thick. Kit Includes 2-Component Polyurethane Foam and a FREE Applicator Gun, 30 ft long Hoses, Wrench, Latex Gloves, O-rings, 10 Extra Spray Nozzles, Lubricant, and Instructions (a $95.00 value!). Weight is 120 lbs and it ships in 2 boxes. Shipping costs include Hazmat Fees.

Standard Formula Foam Kit 15 $39.99

Standard Formula Foam Kit 200 + FREE hose kit $339.99

Standard Formula Foam Kit 600 + FREE Deluxe hose kit $649.99

Fire Retardant Foam Kit 200 + FREE hose kit $369.99

Fire Retardant Foam Kit 600 + FREE Deluxe hose kit $699.99



 

Two-Component Polyurethane Foam Kits


Portable, disposable and self-contained with color-coded, pre-connected hoses.

These kits are available in sizes from 15-600 board feet and provide a quick consistent flow of foam that dries in under a minute. Foam expands 30X.

Fire Retardant (FR) and Standard Formulas available.

Available in 3 different size kits

1.75 pcf (28 kg/m3) Density

R-value = 7.12 / in.

Standard Formula Foam Kit 15 covers 15 square feet at 1 inch thick.

Standard and Fire Retardant Formula Foam Kit 200 covers 200 square feet at 1 inch thick.

Standard and Fire Retardant Formula Foam Kit 600 covers 600 square feet at 1 inch thick.

All kits include Applicator Gun, Hoses, Wrench, Latex Gloves, O-rings, Extra Spray Nozzles, Lubricant, and Instructions.

Our Spray Foam Kits use disposable, pressurized chemical cylinders to dispense polyurethane spray foams eliminating the need for external air compressors, pumping equipment or dry nitrogen. These systems provide quick and easy foam application for repairs and renovations, new installations and production applications.

Our two Component Foam Kits are suitable for use in commercial, residential, transportation and agricultural applications.

Our spray foams offer increased structural strength and sound and thermal insulation while protecting against energy-robbing air infiltration, reducing overall building energy consumption.

Features/Benefits

• Easy to transport

• No expensive maintenance

• No investment cost

• No deposit/No return

• Reduces energy loss by as much as 40%

• Reduces fossil fuel use and improves air quality

• Permanent insulation; does not shrink or settle like cellulose; maintains air seal

• Compatible with all fiber insulation systems including cellulose, fiberglass and rockwool

• No Ozone Depleting Chemicals

• Helps to reduce Green House Gas Emissions

• Expands to fill smallest to largest gaps, cracks and holes, reducing air exchanges

• High R-value = 7.12 / in.

• Closed cell structure

• Allows for down-sized HVAC systems; uses less energy, fewer cycle times, more consistent “comfort level” and reduces equipment maintenance

• When sprayed on roof sheathing, spray foam significantly increases structural strength; important in high wind situations (per the Spray Polyurethane Foam Alliance)

Spray foam can be applied to and will adhere to almost any traditional building material surfaces including; wood, concrete, polystyrene, gypsum board, fiberboard, masonry and metal. Surfaces to be sprayed must be dry, clean and free of dust, dirt, grease and other substances that may inhibit proper adhesion. For best results apply spray foam when surface and ambient temperatures are between 60° - 90°F (16° – 32°C). Chemical contents must be between 70° - 90°F (21° – 32°C) before dispensing. Use all chemical contents within 30 days of initial dispensing.

Spray Foam Kits

Spray Foam Kits

Figure 1

Spray Foam Kits

Figure 2

Spray Foam Kits

Figure 3

Spray Foam Kits

Figure 4

Two-Component Foam Kits Use Guidelines

ALWAYS review and follow the directions provided in your foam kit. The below instructions are a general overview, meant to accompany the reference photos. ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

Prepare the Area

Make sure area to receive foam is clean and dry.

Ensure the area has adequate ventilation.

Ensure appropriate ambient temperature.

Set-up the Foam System

Rock the box or tanks to agitate the product thoroughly.

Ensure foam is brought to a temperature between 70-90°F before dispensing.

Tear open the top of box along perforated lines (Figure 1).

Remove instructions and accessories bag (Figure 2).

Make sure gun is “OFF” by pushing trigger lock into gun body.

Attach hoses. Connect the red hose to the red cylinder (unit A), connect the white hose to the white tank (unit B), inserting hoses into carton holes. Tighten hoses with wrench provided.

Close cartons, unlock gun and spray into waste container to ensure chemicals distribute evenly and equally from both hoses.

Lubricate o-ring (petroleum jelly is fine).

Select spray nozzle (yellow for fan pattern/flat areas, transparent for high-velocity linear spray/cracks and voids). Align slots on nozzle with notch on gun barrel and push/twist nozzle clockwise to lock in place (Figure 3).

Spray again into waste container to ensure product is mixing properly. The foam should be off-white in color (if brown or white one unit is not working properly) ( Figure 4).

Foam is now ready to apply.

Please note that Spray Foam kits cannot be returned and no credits can be issued; also, the item prices includes hazmat fees of $50 to $100 per item.