Are your recessed lights draft proofed?
Our Recessed Light Cover is the answer to this question. Our air-sealed cover has been specifically designed to eliminate heat loss and stop cold air from coming into the house through the recessed light fixture. Our product maintains sufficient space around the fixture for proper functionality.
Benefits:
Energy Savings
Stops draft from coming in through the light fixture.
Can be used with most IC rated recessed lights.
Easy Installation: Simply sits over the recessed light and foam around the light cover.
Suitable for new construction, as well as remodel existing recessed light.
For use in attic spaces, ceiling spaces, dropped ceilings, and insulated ceilings.
Lightweight.
Maintenance free.
These durable and lightweight covers will stop heat loss through the light, and stop condensation from getting into the attic.
Our light covers made out of a flame retarded ABS material
Dimensions: 11 x 11 in. that tapers to 8 x 8 in., 11 in. deep.
Weight: 2.5 lbs each.
Note: Our recessed light covers are intended for use on IC rated thermally protected recessed light fixtures that are installed to manufacturers specifications using the correct wattage light bulb.
Installation Instructions
Step 1: Make sure the recessed light is a thermally protected IC rated light fixture.
Step 2: Confirm the fixture has at least a 1/2" of clearance on all sides when positioned on the rails of the the fixture.
Step 3: Cut a hole or a slot in the side to accommodate for the fixture's wiring and place seal-a-light over the recessed light.
Step 4: Using flame retardant grade foam (available from your local home center), seal around all fours sides and the hole/slot for wiring of the seal-a-light creating an air tight seal between the fixture and ceiling.
ONLY $19.99 each + shipping.
DISCOUNTED SHIPPING AS FOLLOWS:
1 pc=$7.50, 2-10 pcs=$15.00, 11-20 pcs=$20.00, 21 pc+=$25.00
The cart will add $7.50 per pc, we will refund shipping discount after we receive order. Additional shipping is required for shipping to AK and Canada.
Caution:
Our light covers are intended for use on IC rated thermally protected recessed light fixtures that are installed to manufacturers specifications using the correct wattage light bulb. We recommend not using energy inefficient incandescent light bulbs due to energy savings and heat build up.
Blinking lights may indicate cover is too close or improper lamp size.
Our light covers are compatible with sprayed foam, mineral wool, fiber glass and blown-in cellulose.
MADE IN USA
