Magnetic Mail Slot Covers

Magnetic Mail Slot Covers


Magnetic Mail Slot Covers. Eliminate costly drafts from mail slot openings. Magnetic seal prevents loss of warm or cool air. Fits All Mail Slot Openings. For use on wood, fiberglass or metal doors. Easy Installation.

Available in 3 popular colors: WHITE, GOLD, and PEWTER.

White Magnetic Mail Slot Cover $29.00

Pewter Magnetic Mail Slot Cover $29.00

Gold Magnetic Mail Slot Cover $29.00




 

Magnetic Mail Slot Covers

Energy Efficient

  • Eliminate costly drafts from mail slot openings
  • Save on fuel bills.
  • Magnetic seal prevents loss of warm or cool air.
  • Pays for itself quickly.

Decorative Look

  • Eliminates unsightly openings and adds elegance.
  • Door Covers come in attractive colors to match your décor, choose from colors shown below.

Fits All Mail Slot Openings

  • For use on wood or metal doors in conjunction with your existing exterior mail door.

Easy Installation

  • Fastens easily to the interior of
    all wood, fiberglass or metal entry doors or walls in minutes.

Magnetic Mail Slot Covers


Magnetic Mail Slot Covers use flexible magnetic sheet material which allows mail to be easily placed through slot openings with little resistance. The sheet then closes shut immediately to prevent any air drafts created by typical exterior mail slot doors. A magnetic receptive material sheet with an adhesive back is provided for wood door applications. A decorative two-piece mounting bar retains the mail door and conceals mounting screws to add the finishing touch. All hardware is included - see installation instructions below for further details.

Magnetic Mail Slot Doors are stocked in four popular colors to hide unsightly mail slot holes.

Dimensions: 5" x 13-1/2"


Magnetic Mail Slot Covers

Wood / Fiberglass Doors / Walls

1. Remove all existing hardware from opening. Surface must be clean and dry.

2 . Before removing the backing from the Adhesive sheet (E), place sheet over opening centering sheet from left to right and allowing 1/2” overlap at the bottom and mark outline with pencil.

3. Remove backing from sheet (E) and press firmly in place. Use a utility knife to remove excess from opening.

4. Place Cover sheet (A) over Adhesive sheet with the top flush and the sides and bottom overlapping 1/16”. Hold Mounting bar (B) (rounded end down) flush at top and sides of Cover sheet and mark (3) holes.

5. Drill 3/32” holes thru sheets 1/2” deep (3) places and secure Mounting bar with (3) screws (D)

6. Press or slide Decorative strip (C) in place.

Steel Doors

1. Remove all existing hardware from opening. Surface must be clean.

2. Place Cover sheet (A) over opening allowing a 1/2” overlap at the bottom and centered from left to right.

3. Hold Mounting bar (B) (rounded end down) flush at top and sides and mark (3) holes.

4. Drill 3/32” hole thru Cover sheet 1/2” deep (3) places and secure Mounting bar with (3) screws (D).

5. Press or slide Decorative strip (C) in place.