Click link above for 6 additional pages of information about our Attic Stair Insulator Cover

	Battic© Door Attic Stair Cover Item Prices   GOOD: includes stair cover and weatherstripping seal  22x54 or 25x54 Battic© Door Attic Stair Cover Durable Energy Saving Cover stops drafts and energy loss 22x54 fits attic stairs with 22"x54" to 22.5"x54" rough openings 25x54 fits attic stairs with 25"x54" to 25.5"x54" rough openings NOTE: All kits include durable stair cover and weatherstripping. All kits easily install in minutes with no tools       GOOD $29.50 (+$10.50 S&H)       BETTER: includes stair cover and reflective shield   (insulation not included - add your own if desired)   (reflective aluminum shield slips over stair cover, reflects away heat and holds insulation - add your own insulation if desired) Reflective Aluminum Shield slips over stair cover and seals insulation. It also provides a reflective surface that saves energy and reflects away heat. The Reflective Aluminum Shield blocks up to 97% of radiant heat!       BETTER $59.50 (+$14.50 S&H)            BEST: includes stair cover, reflective shield, and our R-50 "Ultimate" insulation kit   (maximize the benefits by insulating your stair cover)   Includes everything you need to quickly and easily seal and insulate your stairs   this is our most popular kit...   Highest insulation of ANY kit available Fastest and easiest installation - NO TOOLS! Add insulation on the sides, or leave off for clearance between trusses. We are the ORIGINAL and the BEST Preferred by Contractors     BEST $129.50  $99.50 + $19.50 S&H    save $30.00 on our BEST kit    (limited time offer) The only stair cover to meet the new MA State Building Codes! Section 6106.2.5 Access Openings: "Access doors, hatches, scuttles, pull down staircases and similar constructions that are part of the building envelope shall be insulated to a level equivalent to the insulation of the surrounding floor, wall and ceiling." Our BEST kit provides R-50. This meets or exceeds the surrounding floor, wall, and ceiling in most any structure. No other stair cover can match us. Do you want the best?

Download the Battic Door Attic Stair Cover Brochure

Download the Battic Door Attic Stair Cover Installation Instructions

 

All our stair cover kits come with a durable strong stair cover. Here is over 350 lbs on top of the stair cover - lightweight and very strong and durable.

 

Our BEST kit includes stair cover, reflective shield, and R-50 insulation.

 

Reflective Aluminum Shield slips over stair cover and seals insulation. It also provides a reflective surface that saves energy and reflects away heat. The Reflective Aluminum Shield blocks up to 97% of radiant heat!  

 

Easy to install. Assemble the stair cover and then bring the stair cover, reflective shield and R-50 insulation into the attic. Final assembly is performed in the attic as the finished kit will not fit through the stairs! 

 

Drop the R-50 insulation into the reflective shield.

 

Then insert the stair cover into the reflective shield.

 

Stair cover is positioned on top of the weatherstrip seal as you leave the attic.

 

When you enter the attic just lift and move the stair cover out of the way.  No hinges or zippers to get in your way or break!

 

The hinges clear the sides and top of the stair cover.

 

A stair cover must be used to seal attic stairs. Without a stair cover, there is nothing between you and the outdoors except the thin 1/8" piece of plywood! Energy Codes require these openings to be sealed and insulated - otherwise they are like an open skylight letting all your heat and AC just pour out of your house - wasting energy and costing you 24/7!

 

Close up of weatherstripping seal around the perimeter of our stair cover. 

 

Cut-away view of our stair cover at one of the numerous trade shows and home shows we exhibit at each year.

FITS BETWEEN TRUSSES!    THE ORIGINAL AND THE BEST!   THE CONTRACTOR'S CHOICE! 

 

INSTALLATION INSTRUCTIONS

 

The Battic© Door Attic Stair Cover is quickly and easily installed in minutes with no tools required! 

 

Included in the Battic© Door Attic Stair Cover kit is the attic stairway cover, a supply of weatherstripping and a set of installation instructions.

 

The attic stairway cover is self-locking - just fold it into shape! Self-locking tabs securely lock the ends of the cover into place - it just takes a minute to assemble!!

 

Test fit the Battic© Door on the folding attic stairway frame. Then apply the adhesive-backed weatherstripping to the top of the folding attic stairway frame. 

 

Then position the Battic© Door Attic Stair Cover onto the weatherstripping as you leave the attic. The weatherstripping is as wide as the attic door frame - just let it fall into place and the stair cover embeds itself into the weatherstripping!

 

That's it - you're done!

 

The Battic© Door Attic Stair Cover is designed to reduce drafts and save energy costs by reducing the transfer of air (drafts) between the conditioned house and the unconditioned attic. Insulation alone cannot do this - you need to prevent unwanted air leakage. And the Battic© Door Attic Stair Cover does this quite well!!

 

However - to maximize the benefits of the Battic© Door Attic Stair Cover, if desired, the insulating value of the Battic© Door Attic Stair Cover can be increased by adding insulation to the top of the cover.

 

We offer 3 kits:

 

GOOD: Includes our stair cover and weatherstripping. Seals your attic stairs.

 

BETTER: Includes our stair cover, weatherstripping, and a special Reflective Aluminum Shield. Add your own insulation and cover it with the reflective shield, or just install the reflective shield. The Relective Aluminum Foil Insulation blocks up to 97% of radiant heat!).

 

BEST: Includes our stair cover, weatherstripping, a special Reflective Aluminum Shield, and R-50 insulation. Our "ULTIMATE KIT"! The Relective Aluminum Foil Insulation blocks up to 97% of radiant heat!). Fits between trusses!

 

The encapsulated fiberglass insulation is 16" thick. Takes just seconds to install - just insert the insulation into the reflective aluminum shield and then position the stair cover over it. So easy to do it takes only minutes - and NO TOOLS REQUIRED!

 

Our "ULTIMATE KIT" provides the highest amount of insulation, the quickest, easiest, install, and the most value. It is the best kit on the market to seal your attic stairs and maximize the benefits of our stair cover. It fits between trusses and can be used with most any pull down stair. 

 

WE ARE THE ORIGINAL STAIR COVER AND THE BEST!

 

WE ARE PREFERRED BY CONTRACTORS!